Jump to content

different imposition layout


rjay23

Recommended Posts

I have a US business sized card with a sequential number on each card. I need to impose it on an 11 x 17 sheet but I need 10 cards that will bust cut on each half of the sheet. It would be as if I had 10 cards imposed with no gaps on an 8.5 x 11 sheet and then two of those together for an 11 x 17 sheet. Can this be accomplished?

 

I've attached a little screenshot of how I need it laid out.

ScreenShot2019-05-16at10_55_49AM.png.369577ffcf5cb6ece4eb68aabf8cec78.png

Link to comment
Share on other sites

Yes. Setup the imposition like this:

 

Horizontal step = 4, spacing = 1.5"

Vertical step = 5, spacing = 0

 

Then, right click or control click on the 1st column and select "discard space and bleed right of column, then do the same for the 3rd column.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...